Results 1 to 2 of 2

Thread: Reinforcement of bended member

  1. #1
    New Member
    Join Date
    June 2, 2017
    Posts
    2
    Current Local Time
    06:26 PM

    Not allowed! Not allowed!

    Reinforcement of bended member

    Hello everybody
    First - I'm sorry for my english
    I added the reinforcement, what copying the shape of rectangle bended beam. When I checked the reinforcements part list I found mistake in length parameters.
    The picture in the table has three parametres. But in the columns of table there are four parameter and the value of the length (B) is wrong. I think, that in this position of reinforcement in workspace Revit counts with some global coordination system. Is it possible? Do you know what with its?
    Thank you for your help.
    Click image for larger version. 

Name:	2019-08-30 09_14_16-Window.png 
Views:	7 
Size:	5.1 KB 
ID:	37342Click image for larger version. 

Name:	2019-08-30 09_13_41-Window.png 
Views:	5 
Size:	6.8 KB 
ID:	37343

  2. #2
    Member
    Join Date
    December 11, 2010
    Location
    Astana
    Posts
    150
    Current Local Time
    12:26 AM

    Not allowed! Not allowed!
    Hi,

    Check the shape family for the correct parameters.
    This is a symmetrical shape, the short side can be A or C, which means that the value of B can be different.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •