Ergebnis 1 bis 9 von 9

Thema: Revit Gutter Components

  1. #1
    Member
    Registriert seit
    May 19, 2011
    Beiträge
    108
    Aktuelle Ortszeit
    07:16 PM

    Not allowed! Not allowed!

    Revit Gutter Components

    After a long break from posting in this forum, I'm pretty excited to be back doing some work in the steel industry. I'm no longer involved with SteelSelect which is a bit sad, but that's a long story... I've created a new website for my work SteelNews.com.au
    My first work in Revit on the site has been creating some standard gutter families, I've created them in 2018 Revit and drawn each profile in Revit (I haven't imported dwg files), I've tested each family to make sure it loads correctly without errors.
    The files are freely available from the website https://steelnews.com.au/revit-downloads/

    Always happy to receive feedback.

    SteelNews.com.au is an independent website, the main goal is to make it easier to design in steel.

    Regards
    Richard Michael
    Geändert von RichardM (May 28th, 2019 um 07:03 AM Uhr)

  2. #2
    Forum Addict Avatar von elton williams
    Registriert seit
    December 7, 2010
    Ort
    Gold Coast
    Beiträge
    2.665
    Aktuelle Ortszeit
    07:46 PM

    Not allowed! Not allowed!
    Good to hear Richard, I'll be sure to check it out tomorrow

  3. #3
    Senior Member Avatar von biff
    Registriert seit
    June 13, 2011
    Ort
    Australia
    Beiträge
    864
    Aktuelle Ortszeit
    08:46 PM

    Not allowed! Not allowed!
    Good on you richard. Already told my students that steel news will grow with revit content. And properly done content at that. Thank you. It is appreciated.
    Peter b

  4. #4
    Member
    Registriert seit
    May 19, 2011
    Beiträge
    108
    Aktuelle Ortszeit
    07:16 PM

    Not allowed! Not allowed!
    Thanks Biff

  5. #5
    Forum Addict Avatar von elton williams
    Registriert seit
    December 7, 2010
    Ort
    Gold Coast
    Beiträge
    2.665
    Aktuelle Ortszeit
    07:46 PM

    Not allowed! Not allowed!
    Hey Richard, I downloaded the gutter profiles today, cheers.
    I would recommend purging the families though. I found all the default materials still in there, as well as all those pesky annotation styles, 21 things to purge in all. I know we are talking in kilobytes here (and I have OCD), but all families got a lot smaller after this, in some cases by 50%.

  6. #6
    Member
    Registriert seit
    May 19, 2011
    Beiträge
    108
    Aktuelle Ortszeit
    07:16 PM

    Not allowed! Not allowed!
    Thanks Elton, really appreciate your feedback. I've uploaded the files, all have been purged and tested.

  7. #7
    Member
    Registriert seit
    May 19, 2011
    Beiträge
    108
    Aktuelle Ortszeit
    07:16 PM

    Not allowed! Not allowed!
    I have added a 185mm fascia family to the SteelNews website https://steelnews.com.au/revit-downloads/
    I've kept the profile face pretty simple, family has been purged.
    Created fresh, no importing of dwg files.

  8. #8
    Member
    Registriert seit
    May 19, 2011
    Beiträge
    108
    Aktuelle Ortszeit
    07:16 PM

    Not allowed! Not allowed!
    SteelNews is starting to come along, I'm reaching out to manufacturers/architects that would like their own content created, can be anywhere in the word. This is the link to my webpage https://steelnews.com.au/our-service...rary-creation/
    Message me if you would like to discuss cheers Richard

  9. #9
    Member
    Registriert seit
    May 19, 2011
    Beiträge
    108
    Aktuelle Ortszeit
    07:16 PM

    Not allowed! Not allowed!
    I've added a Architectural Gutter Revit family profile to site https://steelnews.com.au/revit-downloads/

Ähnliche Themen

  1. Gutter end caps
    Von DavidLarson im Forum Architecture - Family Creation
    Antworten: 10
    Letzter Beitrag: April 9th, 2019, 02:20 AM
  2. Gutter and Roof planes
    Von mona miller im Forum Architecture and General Revit Questions
    Antworten: 12
    Letzter Beitrag: September 23rd, 2018, 09:01 AM
  3. Gutter Ends
    Von dzatto im Forum Architecture and General Revit Questions
    Antworten: 6
    Letzter Beitrag: January 24th, 2012, 08:48 PM
  4. Vertical Gutter ?
    Von confido im Forum Architecture and General Revit Questions
    Antworten: 9
    Letzter Beitrag: November 17th, 2011, 01:23 PM

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •