Affichage des résultats 1 à 9 sur 9

Discussion: Revit Gutter Components

  1. #1
    Member
    Date d'inscription
    mai 2011
    Messages
    108
    Heure locale
    08h54

    Not allowed! Not allowed!

    Revit Gutter Components

    After a long break from posting in this forum, I'm pretty excited to be back doing some work in the steel industry. I'm no longer involved with SteelSelect which is a bit sad, but that's a long story... I've created a new website for my work SteelNews.com.au
    My first work in Revit on the site has been creating some standard gutter families, I've created them in 2018 Revit and drawn each profile in Revit (I haven't imported dwg files), I've tested each family to make sure it loads correctly without errors.
    The files are freely available from the website https://steelnews.com.au/revit-downloads/

    Always happy to receive feedback.

    SteelNews.com.au is an independent website, the main goal is to make it easier to design in steel.

    Regards
    Richard Michael
    Dernière modification par RichardM ; 28/05/2019 à 07h03.

  2. #2
    Forum Addict Avatar de elton williams
    Date d'inscription
    décembre 2010
    Localisation
    Gold Coast
    Messages
    2 658
    Heure locale
    09h24

    Not allowed! Not allowed!
    Good to hear Richard, I'll be sure to check it out tomorrow

  3. #3
    Senior Member Avatar de biff
    Date d'inscription
    juin 2011
    Localisation
    Australia
    Messages
    864
    Heure locale
    10h24

    Not allowed! Not allowed!
    Good on you richard. Already told my students that steel news will grow with revit content. And properly done content at that. Thank you. It is appreciated.
    Peter b

  4. #4
    Member
    Date d'inscription
    mai 2011
    Messages
    108
    Heure locale
    08h54

    Not allowed! Not allowed!
    Thanks Biff

  5. #5
    Forum Addict Avatar de elton williams
    Date d'inscription
    décembre 2010
    Localisation
    Gold Coast
    Messages
    2 658
    Heure locale
    09h24

    Not allowed! Not allowed!
    Hey Richard, I downloaded the gutter profiles today, cheers.
    I would recommend purging the families though. I found all the default materials still in there, as well as all those pesky annotation styles, 21 things to purge in all. I know we are talking in kilobytes here (and I have OCD), but all families got a lot smaller after this, in some cases by 50%.

  6. #6
    Member
    Date d'inscription
    mai 2011
    Messages
    108
    Heure locale
    08h54

    Not allowed! Not allowed!
    Thanks Elton, really appreciate your feedback. I've uploaded the files, all have been purged and tested.

  7. #7
    Member
    Date d'inscription
    mai 2011
    Messages
    108
    Heure locale
    08h54

    Not allowed! Not allowed!
    I have added a 185mm fascia family to the SteelNews website https://steelnews.com.au/revit-downloads/
    I've kept the profile face pretty simple, family has been purged.
    Created fresh, no importing of dwg files.

  8. #8
    Member
    Date d'inscription
    mai 2011
    Messages
    108
    Heure locale
    08h54

    Not allowed! Not allowed!
    SteelNews is starting to come along, I'm reaching out to manufacturers/architects that would like their own content created, can be anywhere in the word. This is the link to my webpage https://steelnews.com.au/our-service...rary-creation/
    Message me if you would like to discuss cheers Richard

  9. #9
    Member
    Date d'inscription
    mai 2011
    Messages
    108
    Heure locale
    08h54

    Not allowed! Not allowed!
    I've added a Architectural Gutter Revit family profile to site https://steelnews.com.au/revit-downloads/

Discussions similaires

  1. Gutter end caps
    Par DavidLarson dans le forum Architecture - Family Creation
    Réponses: 10
    Dernier message: 09/04/2019, 02h20
  2. Gutter and Roof planes
    Par mona miller dans le forum Architecture and General Revit Questions
    Réponses: 12
    Dernier message: 23/09/2018, 09h01
  3. Gutter Ends
    Par dzatto dans le forum Architecture and General Revit Questions
    Réponses: 6
    Dernier message: 24/01/2012, 20h48
  4. Vertical Gutter ?
    Par confido dans le forum Architecture and General Revit Questions
    Réponses: 9
    Dernier message: 17/11/2011, 13h23

Règles de messages

  • Vous ne pouvez pas créer de nouvelles discussions
  • Vous ne pouvez pas envoyer des réponses
  • Vous ne pouvez pas envoyer des pièces jointes
  • Vous ne pouvez pas modifier vos messages
  •