Página 1 de 2 12 ÚltimoÚltimo
Resultados 1 a 10 de 15

Tópico: Array of Varying Nested Family

  1. #1
    Junior Member
    Data de Ingresso
    March 5, 2018
    Posts
    7
    Hora local atual
    06:16 AM

    Not allowed! Not allowed!

    Array of Varying Nested Family

    Hi,

    I'm trying to model a couple of parametric handrail models.

    I've got two different scenarios where I can't get any constraints to work. The two tasks are slightly different, the first the vertical bars need to change length as they are patterned. The second, the bars need to follow the references as the handrail slope changes.

    I assume this can be done, I just have no training in Revit. Would anyone be so kind as to explain this to me please?

    Thanks in advance,

    Jake
    Miniaturas de Anexos Miniaturas de Anexos Capture.JPG   Capture2.JPG  

  2. #2
    Senior Member Avatar de DavidLarson
    Data de Ingresso
    July 10, 2015
    Localização
    Boise, Idaho
    Posts
    749
    Hora local atual
    11:16 PM

    Not allowed! Not allowed!
    Are you making a family or doing it with the handrail tool?

  3. #3
    Junior Member
    Data de Ingresso
    March 5, 2018
    Posts
    7
    Hora local atual
    06:16 AM

    Not allowed! Not allowed!
    I'm making a family, sorry, I thought I'd put that in there...

  4. #4
    Junior Member
    Data de Ingresso
    March 5, 2018
    Posts
    7
    Hora local atual
    06:16 AM

    Not allowed! Not allowed!
    Is anyone able to help out on this one? Thanks in advance.

  5. #5
    Member
    Data de Ingresso
    March 21, 2013
    Localização
    Phoenix, AZ
    Posts
    275
    Hora local atual
    11:16 PM

    Not allowed! Not allowed!
    The railing tool really is the preferred way to accomplish this, especially the one on the right. If you really need it to be a loadable family (why would you do that to yourself?), I'm sure you could wrangle some workarounds to make it work, but they won't be very straightforward.

  6. #6
    Junior Member
    Data de Ingresso
    March 5, 2018
    Posts
    7
    Hora local atual
    06:16 AM

    Not allowed! Not allowed!
    Hi Chris, thanks for the reply.

    The fact that it is a handrail isn't really important, I do quite a lot of families in Revit and this is just an example. What I am interested in is why I'm unable to array a nested family with varying lengths and wondered if anyone had a solution. I thought it must be something that people often require when creating custom families.

  7. #7
    Moderator Avatar de snowyweston
    Data de Ingresso
    December 21, 2010
    Localização
    C.LONDON
    Posts
    4.423
    Hora local atual
    06:16 AM

    Not allowed! Not allowed!
    The trick would be to cut the arrayed (same length) child members in the parent family.

  8. #8
    Junior Member
    Data de Ingresso
    March 5, 2018
    Posts
    7
    Hora local atual
    06:16 AM

    Not allowed! Not allowed!
    Hi Snowyweston, thanks for the input, this is seems to be a solution that could work. I haven't been able to get it to work with nested families though, just in-place solids.

    Another issue is when I add child members by increasing the number of instances of the array, the cut misses the new members. As a workaround you can create the family with as many instances of the array as is practical and anything with less will be fine, but this isn't ideal.

    There surely has to be a proper solution for this?

    Example family attached for reference.
    Arquivos Anexos Arquivos Anexos
    • Tipo de Arquivo: rfa test.rfa (496,0 KB, 3 visualizações)

  9. #9
    Senior Member
    Data de Ingresso
    August 19, 2011
    Localização
    New Hampshire
    Posts
    507
    Hora local atual
    01:16 AM

    Not allowed! Not allowed!
    Array the space between the members, not the members themselves.

  10. #10
    Member
    Data de Ingresso
    March 21, 2013
    Localização
    Phoenix, AZ
    Posts
    275
    Hora local atual
    11:16 PM

    Not allowed! Not allowed!
    Citação Postado originalmente por ISOJake Ver Post
    There surely has to be a proper solution for this?
    Sort of, maybe, conditionally.

    Adaptive components should be able to accomplish the type of dynamic behavior you're after, but they come with their own set of limitations, including a steep learning curve. See here: RevitCat: A Dozen Reasons Not to Use Adaptive Components in Revit

    In the traditional family editor, arrays must contain identical items, since you are arraying a group, which must be identical (by definition). You can play with voids, etc, but the voids must be in the same family as the form you're trying to cut, so that limits nesting options. You want to array non-identical items; therefore, you're in the realm of creative workarounds outside of a "proper solution".

Tópicos Similares

  1. Cut a Nested Family (used to create an array) with a Void
    Por ndjabiras no fórum Architecture - Family Creation
    Respostas: 5
    Último Post: November 30th, 2017, 04:07 PM
  2. Void to cut end off array of nested family - A metal deck roof sheet problem
    Por williamturner1 no fórum Architecture and General Revit Questions
    Respostas: 8
    Último Post: October 23rd, 2016, 06:20 PM
  3. Angled array nested into roof truss family
    Por gioginnelli no fórum Architecture - Family Creation
    Respostas: 17
    Último Post: June 26th, 2014, 06:04 PM
  4. Detail component with nested family- how can I manipulate the nested family?
    Por phoulx no fórum Structure - Family Creation
    Respostas: 5
    Último Post: April 2nd, 2014, 08:59 PM
  5. Array nested voids in a family
    Por dzatto no fórum Architecture - Family Creation
    Respostas: 7
    Último Post: May 25th, 2012, 03:10 AM

Permissões de Postagem

  • Você não pode iniciar novos tópicos
  • Você não pode enviar respostas
  • Você não pode enviar anexos
  • Você não pode editar suas mensagens
  •