Ergebnis 1 bis 10 von 10

Thema: Section Tag does display properly in elevation view, but displays correct in plan

  1. #1
    Junior Member
    Registriert seit
    July 19, 2018
    Beiträge
    13
    Aktuelle Ortszeit
    05:59 PM

    Not allowed! Not allowed!

    Section Tag does display properly in elevation view, but displays correct in plan

    So I made my own section head family, and it displays properly in plan view but not correctly in elevation views. The lines that separate drawing number and sheet number are rotated.
    Miniaturansichten angehängter Grafiken Miniaturansichten angehängter Grafiken Capture 1.PNG   Capture.PNG  
    Angehängte Dateien Angehängte Dateien

  2. #2
    Moderator Avatar von DaveP
    Registriert seit
    January 10, 2011
    Ort
    St Paul, MN
    Beiträge
    3.119
    Aktuelle Ortszeit
    03:59 PM

    Not allowed! Not allowed!
    Lots of threads here about that.
    Just do a search (upper right) for "section head"
    Oh, And welcome to RFO!

  3. #3
    Junior Member
    Registriert seit
    July 19, 2018
    Beiträge
    13
    Aktuelle Ortszeit
    05:59 PM

    Not allowed! Not allowed!
    lolol feel like a newbie, I knew i should've done that . And thanks dawg! I plan on lurking here for a while.

  4. #4
    Junior Member
    Registriert seit
    July 19, 2018
    Beiträge
    13
    Aktuelle Ortszeit
    05:59 PM

    Not allowed! Not allowed!
    I know this is noob, but I couldn't find threads about that on forum.

  5. #5
    Moderator Avatar von DaveP
    Registriert seit
    January 10, 2011
    Ort
    St Paul, MN
    Beiträge
    3.119
    Aktuelle Ortszeit
    03:59 PM

    Not allowed! Not allowed!

  6. #6
    Junior Member
    Registriert seit
    July 19, 2018
    Beiträge
    13
    Aktuelle Ortszeit
    05:59 PM

    Not allowed! Not allowed!
    Link didn't work, I attached a screenshot if you don't believe me. Anyways I figured it out, but my method is ghetto. I copied the middle line from the original section head family. I noticed that line in properties has a "Yes/No" parameter in the "Other" section called "Rotate With Section" which is un-editable, and is checked. (To me that makes no sense because if anything, according to the name it would be unchecked, but whatever) Lets say I did not have the original section head family, how would I create that type of line from scratch? Sorry I am not trying to be annoying, but I rather clear this up now rather than next time I come across a brick wall
    Miniaturansichten angehängter Grafiken Miniaturansichten angehängter Grafiken Capture.PNG  

  7. #7
    Moderator
    "I am NOT a Revit tutor!"
    Avatar von Dave Jones
    Registriert seit
    December 7, 2010
    Ort
    San Luis Obispo, California USA
    Beiträge
    4.538
    Aktuelle Ortszeit
    01:59 PM

    Not allowed! Not allowed!
    Zitat Zitat von upyoas Beitrag anzeigen
    Link didn't work, I attached a screenshot if you don't believe me. Anyways I figured it out, but my method is ghetto. I copied the middle line from the original section head family. I noticed that line in properties has a "Yes/No" parameter in the "Other" section called "Rotate With Section" which is un-editable, and is checked. (To me that makes no sense because if anything, according to the name it would be unchecked, but whatever) Lets say I did not have the original section head family, how would I create that type of line from scratch? Sorry I am not trying to be annoying, but I rather clear this up now rather than next time I come across a brick wall
    well, I tried to find the original post that contained a Section Head family that will rotate as you want and failed. So, I am posting my family that I pilfered from that thread from a couple of years ago. Thanks to cellersick (IIRC) for the original! I didn't know what version of Revit that you are using so the attached family is R2016 so you can upgrade it to where ever you are.
    Angehängte Dateien Angehängte Dateien

  8. #8
    Junior Member
    Registriert seit
    July 19, 2018
    Beiträge
    13
    Aktuelle Ortszeit
    05:59 PM

    Not allowed! Not allowed!
    Thanks! I saw its made a bit different than mine and default Revit one. Lol bumping my question to bottom of thread though, anyone know anything about the "Rotate With Section"Parameter of the middle line in the section header? And how to add it without copying it from Revit's original section head family?

  9. #9
    Forum Co-Founder Avatar von Twiceroadsfool
    Registriert seit
    December 7, 2010
    Ort
    Dallas, TX
    Beiträge
    10.594
    Aktuelle Ortszeit
    03:59 PM

    Not allowed! Not allowed!

  10. #10
    Junior Member
    Registriert seit
    July 19, 2018
    Beiträge
    13
    Aktuelle Ortszeit
    05:59 PM

    Not allowed! Not allowed!
    Bumping this up a little to see if any one knows anything about this mysterious "Rotate With Section" parameter. I am confused how supposedly same object (Line style) has different parameters. I attached 2 screen shots bellow, showing different parameters in properties for 2 drawing lines with same line style. Now the section head I have now works fine (and without the underline cheat), its just not knowing this causes me not to sleep at night (And I'm sure I will regret avoiding this now).
    Miniaturansichten angehängter Grafiken Miniaturansichten angehängter Grafiken c2.PNG   c1.PNG  
    Angehängte Dateien Angehängte Dateien

Ähnliche Themen

  1. Different elevation points in section and plan
    Von jgardner im Forum Architecture and General Revit Questions
    Antworten: 0
    Letzter Beitrag: September 2nd, 2016, 09:07 PM
  2. Changing the Plan and Section/Elevation Representation of trees?
    Von gooner442 im Forum Architecture and General Revit Questions
    Antworten: 11
    Letzter Beitrag: December 9th, 2014, 10:24 AM
  3. graphic display in 3D-Section-View
    Von poomon im Forum Architecture and General Revit Questions
    Antworten: 3
    Letzter Beitrag: June 17th, 2013, 02:24 PM
  4. Antworten: 0
    Letzter Beitrag: June 7th, 2013, 05:15 PM
  5. How to view Section view lines on a plan view bigger than 1:100 scale
    Von eks_al im Forum Architecture and General Revit Questions
    Antworten: 6
    Letzter Beitrag: January 18th, 2012, 12:41 AM

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •