Resultados 1 a 2 de 2

Tópico: Hanger Family

  1. #1
    Junior Member
    Data de Ingresso
    July 12, 2017
    Posts
    18
    Hora local atual
    05:31 PM

    Not allowed! Not allowed!

    Hanger Family

    Hello,
    I am working on a job that was previously modeled with conduit hangers. I need the rod length to be 2" above the pan deck. Is there a way to modify the family to automatically look for the deck and attach to it? I am going through and individually moving every rod to the length I need.
    Thanks

  2. #2
    Forum Co-Founder Avatar de Alfredo Medina
    Data de Ingresso
    December 7, 2010
    Localização
    Orlando, FL, USA
    Posts
    3.188
    Hora local atual
    12:31 PM

    Not allowed! Not allowed!
    To avoid having to adjust every single hanger manually, I can mention two solutions:

    1) Convert the duct or pipe to fabrication parts, then use the hangers from the Fabrication tool. Those are "smart hangers" that find the nearest supporting element above, and adjust the rod(s) to the proper length, and also, adapt the width of the hanger to the duct or pipe. If you want to learn more about this, see this: https://www.youtube.com/watch?v=uJ4sW5yhfdA

    2) Buy an add-on. There are some that do amazing things about hangers. Check Youtube or Linkedin for videos about this. Two of them are: AgaCAD and MagiCAD.
    Última edição por Alfredo Medina; December 16th, 2018 às 11:32 PM. Razão: add-ons

Tópicos Similares

  1. Hanger Schedule
    Por swooll3 no fórum MEP - General
    Respostas: 2
    Último Post: October 17th, 2017, 12:11 PM
  2. Respostas: 2
    Último Post: April 7th, 2016, 06:24 AM
  3. Hanger tag re-number
    Por Brocha no fórum MEP - General
    Respostas: 10
    Último Post: August 18th, 2015, 09:18 PM
  4. Hanger Columns
    Por kev4174 no fórum Structure - General Questions
    Respostas: 10
    Último Post: August 9th, 2013, 09:26 AM
  5. thewrz's super awesome hanger family
    Por thewrz no fórum MEP - Family Creation
    Respostas: 0
    Último Post: February 10th, 2012, 05:58 PM

Permissões de Postagem

  • Você não pode iniciar novos tópicos
  • Você não pode enviar respostas
  • Você não pode enviar anexos
  • Você não pode editar suas mensagens
  •