Risultati da 1 a 2 di 2

Discussione: Hanger Family

  1. #1
    Junior Member
    Data Registrazione
    July 12, 2017
    Messaggi
    18
    Ora locale
    03:57 PM

    Not allowed! Not allowed!

    Hanger Family

    Hello,
    I am working on a job that was previously modeled with conduit hangers. I need the rod length to be 2" above the pan deck. Is there a way to modify the family to automatically look for the deck and attach to it? I am going through and individually moving every rod to the length I need.
    Thanks

  2. #2
    Forum Co-Founder L'avatar di Alfredo Medina
    Data Registrazione
    December 7, 2010
    LocalitÓ
    Orlando, FL, USA
    Messaggi
    3,188
    Ora locale
    10:57 AM

    Not allowed! Not allowed!
    To avoid having to adjust every single hanger manually, I can mention two solutions:

    1) Convert the duct or pipe to fabrication parts, then use the hangers from the Fabrication tool. Those are "smart hangers" that find the nearest supporting element above, and adjust the rod(s) to the proper length, and also, adapt the width of the hanger to the duct or pipe. If you want to learn more about this, see this: https://www.youtube.com/watch?v=uJ4sW5yhfdA

    2) Buy an add-on. There are some that do amazing things about hangers. Check Youtube or Linkedin for videos about this. Two of them are: AgaCAD and MagiCAD.
    Ultima modifica di Alfredo Medina; December 16th, 2018 alle 11:32 PM Motivo: add-ons

Discussioni Simili

  1. Hanger Schedule
    Di swooll3 nel forum MEP - General
    Risposte: 2
    Ultimo Messaggio: October 17th, 2017, 12:11 PM
  2. Risposte: 2
    Ultimo Messaggio: April 7th, 2016, 06:24 AM
  3. Hanger tag re-number
    Di Brocha nel forum MEP - General
    Risposte: 10
    Ultimo Messaggio: August 18th, 2015, 09:18 PM
  4. Hanger Columns
    Di kev4174 nel forum Structure - General Questions
    Risposte: 10
    Ultimo Messaggio: August 9th, 2013, 09:26 AM
  5. thewrz's super awesome hanger family
    Di thewrz nel forum MEP - Family Creation
    Risposte: 0
    Ultimo Messaggio: February 10th, 2012, 05:58 PM

Permessi di Scrittura

  • Tu non puoi inviare nuove discussioni
  • Tu non puoi inviare risposte
  • Tu non puoi inviare allegati
  • Tu non puoi modificare i tuoi messaggi
  •