Resultados 1 al 6 de 6

Tema: Rigid Slab & Foundation Insulation

  1. #1
    Moderator Avatar de cellophane
    Fecha de Ingreso
    09 ago, 11
    Ubicación
    Louisville, KY
    Mensajes
    6,229
    Hora local
    02:09

    Not allowed! Not allowed!

    Rigid Slab & Foundation Insulation

    How are people handling rigid slab insulation? If I use a wall I can use a wall sweep and it is easy but if I use a structural foundation I can't use a wall sweep and would have to use an in-place model. Is one way better than the other from an architectural standpoint (str isn't in Revit yet )

  2. #2
    Senior Member Avatar de chris.macko
    Fecha de Ingreso
    12 abr, 11
    Ubicación
    Chicago, IL
    Mensajes
    535
    Hora local
    01:09

    Not allowed! Not allowed!
    Slab insulation or foundation wall insulation? Foundation insulation could just be a wall itself. I usually make a separate floor type for insulated slabs which makes it easy to add a filter to show those areas in plan. This gets tricky with sloped floors though.

  3. #3
    Moderator Avatar de cellophane
    Fecha de Ingreso
    09 ago, 11
    Ubicación
    Louisville, KY
    Mensajes
    6,229
    Hora local
    02:09

    Not allowed! Not allowed!
    Cita Iniciado por chris.macko Ver Mensaje
    Slab insulation or foundation wall insulation? Foundation insulation could just be a wall itself. I usually make a separate floor type for insulated slabs which makes it easy to add a filter to show those areas in plan. This gets tricky with sloped floors though.
    Sorry - foundation wall insulation. I'm brain dead today
    Miniaturas Adjuntadas Miniaturas Adjuntadas FoundationInsulation.PNG  

  4. #4
    Member
    Fecha de Ingreso
    18 may, 11
    Ubicación
    Calgary, AB
    Mensajes
    413
    Hora local
    00:09

    Not allowed! Not allowed!
    I usually only showed vertical on the outside using a wall. Floors and walls are probably the better way.
    You could throw generic models in there as a contender for it's joinablity and being able to make it parametric.

    Don't have to many choices to pick from.

  5. #5
    Forum Addict Avatar de GMcDowellJr
    Fecha de Ingreso
    21 dic, 10
    Ubicación
    Phoenix, AZ
    Mensajes
    2,658
    Hora local
    23:09

    Not allowed! Not allowed!
    What about using a wall for the vertical insulation and a sweep on that wall for the horizontal?

    Not quite as automated but might be better in the long run when conditions vary.


    Sent from my iPhone using Tapatalk

  6. #6
    BIM there, done that Avatar de cliff collins
    Fecha de Ingreso
    14 dic, 10
    Ubicación
    St. Louis, MO
    Mensajes
    1,961
    Hora local
    01:09

    Not allowed! Not allowed!
    Another possibility--Slab Edge on the floor for the under-slab insulation.
    Thick Concrete Wall for Foundation, with a sweep for foundation/vertical insulation.

Temas Similares

  1. Raft Foundation inconstant slab thickness
    Por azsaqib en el foro Structure - General Questions
    Respuestas: 3
    Último Mensaje: 23/12/2014, 02:59
  2. Curved and sloped foundation slab
    Por swatson en el foro Structure - General Questions
    Respuestas: 2
    Último Mensaje: 19/12/2014, 17:55
  3. Curved and sloping foundation slab
    Por swatson en el foro Structure - Family Creation
    Respuestas: 1
    Último Mensaje: 18/12/2014, 14:29
  4. Wall and slab foundation
    Por Tomcsie en el foro Architecture and General Revit Questions
    Respuestas: 2
    Último Mensaje: 11/03/2013, 16:16
  5. Foundation Plans and Slab Edges
    Por dzatto en el foro Architecture and General Revit Questions
    Respuestas: 12
    Último Mensaje: 28/02/2011, 20:47

Permisos de Publicación

  • No puedes crear nuevos temas
  • No puedes responder temas
  • No puedes subir archivos adjuntos
  • No puedes editar tus mensajes
  •