Ergebnis 1 bis 10 von 10

Thema: How to replicate these type of panels

  1. #1
    Junior Member
    Registriert seit
    May 15, 2014
    Beiträge
    14
    Aktuelle Ortszeit
    04:18 AM

    Not allowed! Not allowed!

    How to replicate these type of panels

    In an effort to make myself more valuable to the firm, I am trying to get more proficient in creating adaptive components and conceptual masses. They don't like to break the mold too much so curvilinear masses are out for now. I have found a lot of rectilinear geometries and systems that I find interesting and I think the designers here would too. I want to start replicating these so I can learn the method of creating these pieces (of course I am not going to steal them, just use them as a learning tool.)

    Here is an example of what I am talking about by SHoP: a f a s i a: SHOP ARCHITECTS. I am intrigued by the pattern created by the brick as well as the depth change and think it is a good place to start given the way my firm works and the types of jobs we get. I'd like to find some tutorials or literature as to how to create these types of families to give a presentation to the firm on the availability of these tools in the software that we already have.

    Any help or direction to help would be greatly appreciated.

  2. #2
    Forum Addict Avatar von elton williams
    Registriert seit
    December 7, 2010
    Ort
    Gold Coast
    Beiträge
    2.665
    Aktuelle Ortszeit
    07:18 PM

    Not allowed! Not allowed!
    Have a look at Zach Kron's Revit videos over at designreform.net.

  3. #3
    Moderator Avatar von snowyweston
    Registriert seit
    December 21, 2010
    Ort
    C.LONDON
    Beiträge
    4.415
    Aktuelle Ortszeit
    10:18 AM

    Not allowed! Not allowed!
    I believe SHoP did that in Rhino - there was a quite a write up on their work process for that very project. That's not to say it's not do-able in Revit, and I'd 2nd Elton's suggestion to check out Zach's work (he covered this kind of thing in the early days of his Buildz blog)

  4. #4
    Autodesk Avatar von JeffH
    Registriert seit
    December 13, 2010
    Ort
    The Ivory Tower (Manchester NH)
    Beiträge
    792
    Aktuelle Ortszeit
    05:18 AM

    Not allowed! Not allowed!
    Zitat Zitat von snowyweston Beitrag anzeigen
    I believe SHoP did that in Rhino - there was a quite a write up on their work process for that very project. That's not to say it's not do-able in Revit, and I'd 2nd Elton's suggestion to check out Zach's work (he covered this kind of thing in the early days of his Buildz blog)
    Not sure of the entire process, but I think a portion of it was done in Revit. The customer gallery in Waltham has a display of this building with a bunch of 3d models and images. I don't think we would feature this in our gallery if it was a Rhino project. :-)

  5. #5
    Moderator Avatar von snowyweston
    Registriert seit
    December 21, 2010
    Ort
    C.LONDON
    Beiträge
    4.415
    Aktuelle Ortszeit
    10:18 AM

    Not allowed! Not allowed!
    Zitat Zitat von JeffH Beitrag anzeigen
    Not sure of the entire process, but I think a portion of it was done in Revit.
    Revit Building 9 (!) going by the images on ArchDaily - with a little bit of Digital Project thrown in as well.

  6. #6
    Forum Co-Founder Avatar von Alfredo Medina
    Registriert seit
    December 7, 2010
    Ort
    Orlando, FL, USA
    Beiträge
    3.173
    Aktuelle Ortszeit
    05:18 AM

    Not allowed! Not allowed!
    Seems to be possible in Revit. A pattern-based panel applied to a divided surface; the surface is made after cutting some holes for the openings.
    Miniaturansichten angehängter Grafiken Miniaturansichten angehängter Grafiken 06-07-2014 7-30-32 AM.jpg  
    Angehängte Dateien Angehängte Dateien

  7. #7
    Moderator Avatar von snowyweston
    Registriert seit
    December 21, 2010
    Ort
    C.LONDON
    Beiträge
    4.415
    Aktuelle Ortszeit
    10:18 AM

    Not allowed! Not allowed!
    Nice solution Alfredo but I think the desire here might be the same as when I looked into doing something similar, in as much, to have the individual masonry modules in their individual locations with relative offsets modeled.

  8. #8
    Forum Co-Founder Avatar von Alfredo Medina
    Registriert seit
    December 7, 2010
    Ort
    Orlando, FL, USA
    Beiträge
    3.173
    Aktuelle Ortszeit
    05:18 AM

    Not allowed! Not allowed!
    Oh, you mean, to model the bricks as in the photographs? Might take more time, of course, but should be possible, too. This was just a quick test to demonstrate that this is doable in Revit, if time permits.

  9. #9
    Member Avatar von Andrew P
    Registriert seit
    February 19, 2011
    Beiträge
    366
    Aktuelle Ortszeit
    09:18 AM

    Not allowed! Not allowed!
    The bricks where modelled in Autocad, Rhino, Generative Component and Digital project. Not sure which sequence they used. Revit was only used for the usual coordination and documentation of the core. Klicke auf die Grafik für eine größere Ansicht

Name:	3432131703_311cd3c39e_o.jpg
Hits:	76
Größe:	62,3 KB
ID:	17642Klicke auf die Grafik für eine größere Ansicht

Name:	3432131647_e9f3713541_o.jpg
Hits:	66
Größe:	61,5 KB
ID:	17644Klicke auf die Grafik für eine größere Ansicht

Name:	3432132141_8fa3dedc4b_o.jpg
Hits:	69
Größe:	398,4 KB
ID:	17645Klicke auf die Grafik für eine größere Ansicht

Name:	3432946718_65be673334_o.jpg
Hits:	68
Größe:	716,3 KB
ID:	17646Klicke auf die Grafik für eine größere Ansicht

Name:	3432946208_8caceaed02_o.jpg
Hits:	67
Größe:	456,8 KB
ID:	17643
    Geändert von Andrew P (June 8th, 2014 um 08:07 AM Uhr)

  10. #10
    Forum Co-Founder Avatar von Alfredo Medina
    Registriert seit
    December 7, 2010
    Ort
    Orlando, FL, USA
    Beiträge
    3.173
    Aktuelle Ortszeit
    05:18 AM

    Not allowed! Not allowed!
    The bricks could have been modeled in Revit as well.

Ähnliche Themen

  1. edit space type and building type database
    Von ekkonap im Forum MEP - General
    Antworten: 5
    Letzter Beitrag: August 8th, 2017, 04:50 PM
  2. select by parameter? curtain wall panels' materials by parameter, by type or family?
    Von oompa_l im Forum Architecture and General Revit Questions
    Antworten: 1
    Letzter Beitrag: January 24th, 2013, 02:20 PM
  3. NOOB question: delete callout type and section type?
    Von lost again again im Forum Architecture and General Revit Questions
    Antworten: 2
    Letzter Beitrag: July 31st, 2012, 01:28 AM
  4. Buildz Bitmap to Panel Plugin - Cannot replicate sample file
    Von tjgreatrex im Forum Architecture - Conceptual Massing and Adaptive Components
    Antworten: 1
    Letzter Beitrag: September 21st, 2011, 03:03 PM

Stichworte

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •