Página 1 de 2 12 ÚltimoÚltimo
Resultados 1 al 10 de 12

Tema: 2012 Kills the Elevation Mass Transparency Workaround?

  1. #1
    Forum Addict
    Fecha de Ingreso
    27 ene, 11
    Mensajes
    2,025
    Hora local
    04:11

    Not allowed! Not allowed!

    2012 Kills the Elevation Mass Transparency Workaround?

    Some of us used to use planes of masses with a transparent glass material to add depth to elevations.

    When I upgrade projects to 2012, these masses are no longer transparent.

    Any idea why, or how to fix this?

    The only fix I have so far is to set the Mass category to 'Ghost Surfaces' in the view, but I no longer have granular control over the amount of transparency.

    You can play around with 3D views set as backgrounds, but that is annoying.

  2. #2
    Administrator Avatar de Ian.Kidston
    Fecha de Ingreso
    07 dic, 10
    Ubicación
    Melbourne, Australia
    Mensajes
    1,145
    Hora local
    04:11

    Not allowed! Not allowed!
    Not much of a work around, but I remember reading that if you create the mass in an earlier version of revit and then import it, the properties of the mass come with it into 2012.

  3. #3
    Forum Addict
    Fecha de Ingreso
    27 ene, 11
    Mensajes
    2,025
    Hora local
    04:11

    Not allowed! Not allowed!
    This happens after a project upgrade...so, there is a Mass family (not in-place) in a 2011 project, and when upgraded to 2012, the same Mass family no longer retains its transparency in elevation views?

  4. #4
    Administrator Avatar de Munkholm
    Fecha de Ingreso
    07 dic, 10
    Ubicación
    Kingdom of Denmark
    Mensajes
    4,253
    Hora local
    19:11

    Not allowed! Not allowed!
    For this trick to work, you´re using 3D views as elevations right?

    Did a quick test in 2011 and upgraded it to 2012, and don´t really see any difference in the transparency... what am I missing?
    Archivos Adjuntados Archivos Adjuntados

  5. #5
    Forum Addict
    Fecha de Ingreso
    27 ene, 11
    Mensajes
    2,025
    Hora local
    04:11

    Not allowed! Not allowed!
    Cita Iniciado por Munkholm Ver Mensaje
    For this trick to work, you´re using 3D views as elevations right?
    No, this used to work with a normal elevation.

    The masses had a special 'glass' material applied that would progressively 'fade' things in the background.

    It still works in 3D, but it is much easier and better to keep it all in one elevation. So, no ideas? I think something has been changed in the graphic styles, and I think it may have something to do with Ghost Surfaces etc.

  6. #6
    Administrator Avatar de Munkholm
    Fecha de Ingreso
    07 dic, 10
    Ubicación
    Kingdom of Denmark
    Mensajes
    4,253
    Hora local
    19:11

    Not allowed! Not allowed!
    Cita Iniciado por luke.johnson Ver Mensaje
    No, this used to work with a normal elevation.
    Hmmm... Sure about that? Glass only shows as transparent in 3D views, while it´s opaque in elevation views.

  7. #7
    Forum Addict
    Fecha de Ingreso
    27 ene, 11
    Mensajes
    2,025
    Hora local
    04:11

    Not allowed! Not allowed!
    Cita Iniciado por Munkholm Ver Mensaje
    Hmmm... Sure about that? Glass only shows as transparent in 3D views, while it´s opaque in elevation views.
    It definitely works in 2011. Have a look at the attached images.
    Miniaturas Adjuntadas Miniaturas Adjuntadas 2011 version.jpg   2011 context.jpg  

  8. #8
    Administrator Avatar de Munkholm
    Fecha de Ingreso
    07 dic, 10
    Ubicación
    Kingdom of Denmark
    Mensajes
    4,253
    Hora local
    19:11

    Not allowed! Not allowed!
    What can I say... tested it before, and could get nothing but opaque. But just now noticed that your mass is an in-place. My first test used a conceptual mass loaded into the test project, and that DO NOT work... Did a new test just now with a in-place mass in 2011, and it worked just like you said!

    Now, I took the new working test created in RAC2011 and opened it in RAC2012... And guess what? It still works... Go figure
    Miniaturas Adjuntadas Miniaturas Adjuntadas elev_2012.PNG  

  9. #9
    Forum Addict
    Fecha de Ingreso
    27 ene, 11
    Mensajes
    2,025
    Hora local
    04:11

    Not allowed! Not allowed!

    Craziness

    Ok, here is what I have discovered...it is very difficult to get this workaround working in 2012. However, if you have a working project in 2011 and you upgrade it to 2012, then the effect remains.

    However, as soon as you 'Purge' the 2012 version - boom, the effect disappears before your very eyes!

    To prove this, open the 2011 A file - it works fine. Purge it, still works.

    Now open the 2012 A file - it works. Purge it - its broken!

    Note - I was able to retrospectively get the effect in 2012 by following this process:
    1. Open a 2011 file that has the effect.
    2. Rename any relevant masses or materials in the 2012 file so that you can cleanly 'paste' the 2011 mass.
    3. Copy the mass from the 2011 file and paste it into the 2012 file.
    4. This 'might' work for you...
    Archivos Adjuntados Archivos Adjuntados

  10. #10
    Forum Addict
    Fecha de Ingreso
    27 ene, 11
    Mensajes
    2,025
    Hora local
    04:11

    Not allowed! Not allowed!
    http://whatrevitwants.blogspot.com/2...liminates.html
    Purge command in Revit 2012 eliminates Elevation Mass transparency

Temas Similares

  1. Mass face
    Por madsagger en el foro Architecture and General Revit Questions
    Respuestas: 10
    Último Mensaje: 14/04/2011, 15:27
  2. Mass geometry
    Por madsagger en el foro Architecture and General Revit Questions
    Respuestas: 1
    Último Mensaje: 06/04/2011, 09:47
  3. Site elevation vs. Shared Elevation
    Por KimArndt en el foro Architecture and General Revit Questions
    Respuestas: 2
    Último Mensaje: 28/03/2011, 14:24
  4. Lost transparency, png-images
    Por Søren Damgaard Jensen en el foro Architecture and General Revit Questions
    Respuestas: 2
    Último Mensaje: 28/02/2011, 13:04
  5. Infrastructure / Transparency
    Por Munkholm en el foro Forum Suggestions and Feedback
    Respuestas: 23
    Último Mensaje: 08/01/2011, 13:28

Permisos de Publicación

  • No puedes crear nuevos temas
  • No puedes responder temas
  • No puedes subir archivos adjuntos
  • No puedes editar tus mensajes
  •