Pagina 1 van de 2 12 LaatsteLaatste
Resultaten 1 tot 10 van de 18

Onderwerp: Making sure all views and details are on sheets

  1. #1
    Moderator
    "OMG I killed Revit"
    dzatto's Avatar
    Ingeschreven
    December 9, 2010
    Locatie
    Dallas, TX
    Berichten
    5.236
    Huidige lokale tijd
    05:05

    Not allowed! Not allowed!

    Making sure all views and details are on sheets

    This is a noob question if I've ever heard one, but here it goes:

    I'm at the end of a small project, so it's not a big problem now. But, on bigger projects, how can you be sure that all of your views, details, callout, section, etc. etc. make it on to a sheet? I can see issuing a set, then realizing there is a view missing.

    Any ideas? Or is it just a matter of checking and rechecking to make sure you have everything?

  2. #2
    Moderator
    "RFO 2012 Spelling Bee Champion"
    Alex Cunningham's Avatar
    Ingeschreven
    December 8, 2010
    Locatie
    Northern California
    Berichten
    3.572
    Huidige lokale tijd
    03:05

    Not allowed! Not allowed!
    to the best of your ability manual checking is the best. Quality Checks is what we call them.

    This is also a way Revit can help in crunch time though. Browser Organization (see attached image) F1 has a lot of info on this.
    Bijgevoegde Thumbnails Bijgevoegde Thumbnails Browser Organization Prop.JPG  

  3. #3
    Moderator
    "OMG I killed Revit"
    dzatto's Avatar
    Ingeschreven
    December 9, 2010
    Locatie
    Dallas, TX
    Berichten
    5.236
    Huidige lokale tijd
    05:05

    Not allowed! Not allowed!
    got it. I'll check it out in the help files. Thanks.

  4. #4
    Revit Rendering Guru
    Ingeschreven
    December 7, 2010
    Berichten
    98
    Huidige lokale tijd
    03:05

    Not allowed! Not allowed!
    You could create a View List Schedule and schedule the Family, View Name, Sheet, and Sheet Name fields. It won't show legends or schedules though.
    Bijgevoegde Thumbnails Bijgevoegde Thumbnails 12-14-2010 9-24-55 AM.png  

  5. #5
    Moderator
    "I am NOT a Revit tutor!"
    Dave Jones's Avatar
    Ingeschreven
    December 7, 2010
    Locatie
    San Luis Obispo, California USA
    Berichten
    4.536
    Huidige lokale tijd
    03:05

    Not allowed! Not allowed!
    Citaat Oorspronkelijk geplaatst door dzatto Bekijk Berichten
    This is a noob question if I've ever heard one, but here it goes:

    I'm at the end of a small project, so it's not a big problem now. But, on bigger projects, how can you be sure that all of your views, details, callout, section, etc. etc. make it on to a sheet? I can see issuing a set, then realizing there is a view missing.

    Any ideas? Or is it just a matter of checking and rechecking to make sure you have everything?
    View tab/Sheet Composition/View. If your view is in the list it's not on a sheet. I don't have Revit open right now but I think you need to be in a sheet to make this work.
    Laatst gewijzigd door Dave Jones; 14-12-10 om 16:34. Reden: added info

  6. #6
    Moderator
    "RFO 2012 Spelling Bee Champion"
    Alex Cunningham's Avatar
    Ingeschreven
    December 8, 2010
    Locatie
    Northern California
    Berichten
    3.572
    Huidige lokale tijd
    03:05

    Not allowed! Not allowed!
    Citaat Oorspronkelijk geplaatst door muttlieb Bekijk Berichten
    You could create a View List Schedule and schedule the Family, View Name, Sheet, and Sheet Name fields. It won't show legends or schedules though.
    I like this I am going to add this into our template. Awesome for detailing! My soultion simply moves the view under the sheet in the browser.

  7. #7
    Moderator
    "OMG I killed Revit"
    dzatto's Avatar
    Ingeschreven
    December 9, 2010
    Locatie
    Dallas, TX
    Berichten
    5.236
    Huidige lokale tijd
    05:05

    Not allowed! Not allowed!
    Citaat Oorspronkelijk geplaatst door Dave Jones Bekijk Berichten
    View tab/Sheet Composition/View. If your view is in the list it's not on a sheet. I don't have Revit open right now but I think you need to be in a sheet to make this work.
    That's not accurate, for some reason. You do have to be in a sheet, so I opened my sheet with my schedules on it. Every schedule showed up in the list! It's obviously on a sheet, I'm looking right at it!

  8. #8
    Forum Co-Founder Twiceroadsfool's Avatar
    Ingeschreven
    December 7, 2010
    Locatie
    Dallas, TX
    Berichten
    10.529
    Huidige lokale tijd
    05:05

    Not allowed! Not allowed!
    Theres a much easier way.

    You can create a Project browser sort called "Views not on sheets," and Filter by Sheet Number (it wont exist). Then the ONLY views that are in the top of the project browser, are the views NOT YET placed on sheets. Everything else is only accessible down in the SHEETS portion.

    If theres anything in the top, its not on a sheet.

  9. #9
    Moderator
    "OMG I killed Revit"
    dzatto's Avatar
    Ingeschreven
    December 9, 2010
    Locatie
    Dallas, TX
    Berichten
    5.236
    Huidige lokale tijd
    05:05

    Not allowed! Not allowed!
    Citaat Oorspronkelijk geplaatst door Twiceroadsfool Bekijk Berichten
    Theres a much easier way.

    You can create a Project browser sort called "Views not on sheets," and Filter by Sheet Number (it wont exist). Then the ONLY views that are in the top of the project browser, are the views NOT YET placed on sheets. Everything else is only accessible down in the SHEETS portion.

    If theres anything in the top, its not on a sheet.
    Yep, just found it. Works great.

  10. #10
    Moderator
    "I am NOT a Revit tutor!"
    Dave Jones's Avatar
    Ingeschreven
    December 7, 2010
    Locatie
    San Luis Obispo, California USA
    Berichten
    4.536
    Huidige lokale tijd
    03:05

    Not allowed! Not allowed!
    Citaat Oorspronkelijk geplaatst door dzatto Bekijk Berichten
    That's not accurate, for some reason. You do have to be in a sheet, so I opened my sheet with my schedules on it. Every schedule showed up in the list! It's obviously on a sheet, I'm looking right at it!
    well just shows to go ya that you get what you pay for. I use this method to check which view are not on sheet all the time. I never noticed that schedules didn't follow the rules. Probably because as soon as I create a schedule I put it on a sheet.

    Sorry for the bogus info. In the future I'm going to go with Aaron's suggestion also

Gelijkaardige Onderwerpen

  1. Views on multiple sheets
    Door stl4310 in forum Architecture and General Revit Questions
    Reacties: 25
    Laatste Bericht: 04-08-14, 08:47
  2. Scheduling door details
    Door stl4310 in forum Architecture and General Revit Questions
    Reacties: 3
    Laatste Bericht: 28-03-11, 22:01
  3. Rearranging views onto different sheets
    Door dzatto in forum Architecture and General Revit Questions
    Reacties: 23
    Laatste Bericht: 11-02-11, 14:40
  4. Details with 2 views
    Door dzatto in forum Architecture and General Revit Questions
    Reacties: 9
    Laatste Bericht: 09-02-11, 00:30

Forum Rechten

  • Je mag geen nieuwe onderwerpen plaatsen
  • Je mag geen reacties plaatsen
  • Je mag geen bijlagen toevoegen
  • Je mag jouw berichten niet wijzigen
  •