Resultados 1 al 3 de 3

Tema: Curtain Wall as Dasheed Line?

  1. #1
    Member
    Fecha de Ingreso
    03 sep, 12
    Mensajes
    51
    Hora local
    01:26

    Not allowed! Not allowed!

    Curtain Wall as Dasheed Line?

    Hi folks,

    Im working on a shopping centre project. Although shopfronts will most likely be glazed, I need to display them (in plan) as a dashed line, as they are typically installed by the tenant.

    Is there a way to display a curtainw all as a dashed line in plan?

    Thanks in advance!

  2. #2
    Moderator
    "I am NOT a Revit tutor!"
    Avatar de Dave Jones
    Fecha de Ingreso
    07 dic, 10
    Ubicación
    San Luis Obispo, California USA
    Mensajes
    4,536
    Hora local
    18:26

    Not allowed! Not allowed!
    Cita Iniciado por smurch Ver Mensaje
    Hi folks,

    Im working on a shopping centre project. Although shopfronts will most likely be glazed, I need to display them (in plan) as a dashed line, as they are typically installed by the tenant.

    Is there a way to display a curtainw all as a dashed line in plan?

    Thanks in advance!
    override graphics/By Element or By Category (depending on if you want to change one or them all)/Cut Lines and change the pattern to what ever dashed line type you like

  3. #3
    Member
    Fecha de Ingreso
    03 sep, 12
    Mensajes
    51
    Hora local
    01:26

    Not allowed! Not allowed!
    fantastic! not sure why i didnt think of that...
    cheers

Temas Similares

  1. Curtain System - Mullions out of line
    Por R-Construction en el foro Architecture - Conceptual Massing and Adaptive Components
    Respuestas: 7
    Último Mensaje: 10/06/2014, 18:21
  2. Curtain System grid line rotation
    Por tommason en el foro Architecture - Conceptual Massing and Adaptive Components
    Respuestas: 3
    Último Mensaje: 21/10/2012, 12:19
  3. Curtain Wall in a group, wont cut wall
    Por Alfienoakes en el foro Architecture and General Revit Questions
    Respuestas: 7
    Último Mensaje: 05/10/2012, 13:06
  4. How can i make the curtain system grid being straight line in elevation?
    Por ahmed_hassan en el foro Architecture and General Revit Questions
    Respuestas: 6
    Último Mensaje: 23/09/2011, 21:17

Etiquetas para este Tema

Permisos de Publicación

  • No puedes crear nuevos temas
  • No puedes responder temas
  • No puedes subir archivos adjuntos
  • No puedes editar tus mensajes
  •