Resultados 1 al 3 de 3

Tema: void for curtain panels does not cut

  1. #1
    Member
    Fecha de Ingreso
    20 oct, 11
    Ubicación
    UAE
    Mensajes
    169
    Hora local
    04:49

    Not allowed! Not allowed!

    void for curtain panels does not cut

    Help!!!
    How can I create a curtain wall door or window family which will have a void to cut out some offset from neighboring panels? I made a curtain wall door family created ref planes with label for two sides and the top then created a void geometry and attached to ref planes. Now when I load it and apply to my walls it doesn't cut anything. I understand that there should be a sample wall (or panel in my case) in th family editor to be cut but for curtain based families I don't seem to find that. Anybody have done this before?

  2. #2
    Junior Member
    Fecha de Ingreso
    24 ene, 12
    Mensajes
    23
    Hora local
    23:49

    Not allowed! Not allowed!
    Any resolution to this?

  3. #3
    Moderator
    "I am NOT a Revit tutor!"
    Avatar de Dave Jones
    Fecha de Ingreso
    07 dic, 10
    Ubicación
    San Luis Obispo, California USA
    Mensajes
    4,534
    Hora local
    16:49

    Not allowed! Not allowed!
    Cita Iniciado por designimpressions Ver Mensaje
    Any resolution to this?
    no answers probably because the original question isn't very clear. A window or door in a wall and a curtain wall door in a curtain wall are two completely different things. A curtain wall door does not need a void to be placed in a curtain wall, just replace a curtain panel with a curtain wall door. If you want a door in a wall, use a regular door, again, no void required. Same with a window. If that doesn't answer your question, please state what your issue is and how you're going about getting to the issue with what Revit content. The OP was obviously (to me) going to way to much trouble to accomplish something that is a snap in Revit.

Temas Similares

  1. Sloped curtain system panels
    Por hopfrog en el foro Architecture and General Revit Questions
    Respuestas: 2
    Último Mensaje: 08/08/2012, 08:19
  2. curtain wall panels
    Por redmonki en el foro Architecture and General Revit Questions
    Respuestas: 3
    Último Mensaje: 12/06/2012, 06:46
  3. Curtain panels in room's embeded schedule
    Por YarUnderoaker en el foro Architecture and General Revit Questions
    Respuestas: 7
    Último Mensaje: 10/04/2012, 04:32
  4. Existing Curtain Wall w/ New Panels
    Por Chadwick17 en el foro Architecture and General Revit Questions
    Respuestas: 9
    Último Mensaje: 14/03/2012, 21:03
  5. Custom Curtain Panels
    Por MikeMaloney en el foro Architecture and General Revit Questions
    Respuestas: 3
    Último Mensaje: 09/01/2011, 14:09

Etiquetas para este Tema

Permisos de Publicación

  • No puedes crear nuevos temas
  • No puedes responder temas
  • No puedes subir archivos adjuntos
  • No puedes editar tus mensajes
  •