Announcement

Collapse
No announcement yet.

Admin consoles not available after installing Revit Server 2013 w/ Revit Server 2012

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Mike Adams
    replied
    Originally posted by Markus View Post
    What is the error message? I encountered the issue, that Revit Server Administrator was unavailable....

    Autodesk came back with the solution, which required:

    run the aspnet_regiis command from the .NET Framework folder.

    Go to this folder at the elevated DOS Command prompt.
    "CD C:\Windows\Microsoft.NET\Framework64\v4.0.30319" , and then run the “aspnet_regiis –I” command.
    Yep, this worked for me......wish I would have found this thread before the permanent keyboard indention's were in my forehead! Just in time to figure out RS2015.....ugh!

    Thanks for the help!!!

    Leave a comment:


  • jasonbailly
    replied
    one of my servers admin console was unavailable today as well. When this has happened in the past it is almost always after a windows update and i need to reboot the server. that was the case today as well.

    Leave a comment:


  • Alex Cunningham
    replied
    One question. Did you preform a server upgrade or did you install on a fresh formatted hard drive? I too have has issues with the Admin Console not being available. In my research and testing the only thing that would fix the problem is a fresh install of the Server OS on a blank hard drive on the machine. Sucks... but.... might be worth a try.

    Seems that if you upgrade the machine from a previous OS there is crap that gets left behind that interferes with IIS.

    Just my 2 cents

    Leave a comment:


  • kevinraymund
    replied
    Didn't work for me

    Originally posted by taurerm View Post
    My problem got cured by opening Command Prompt and using %windir%\Microsoft.NET\Framework64\v4.0.30319\aspn et_regiis.exe -i
    hello! any other solutions from Autodesk regarding this problem? The elevated DOS command prompt solution didn't work for me. Please help.

    I'm using Windows Server 2008 R2.

    Leave a comment:


  • taurerm
    replied
    Originally posted by brianlee View Post
    Thanks, that solution worked for me.
    My problem got cured by opening Command Prompt and using %windir%\Microsoft.NET\Framework64\v4.0.30319\aspn et_regiis.exe -i

    Leave a comment:


  • brianlee
    replied
    Worked

    Thanks, that solution worked for me.

    Originally posted by Markus View Post
    What is the error message? I encountered the issue, that Revit Server Administrator was unavailable....

    Autodesk came back with the solution, which required:

    run the aspnet_regiis command from the .NET Framework folder.

    Go to this folder at the elevated DOS Command prompt.
    "CD C:\Windows\Microsoft.NET\Framework64\v4.0.30319" , and then run the “aspnet_regiis –I” command.

    Leave a comment:


  • scott.settles
    replied
    Originally posted by cliff collins View Post
    Watch out for Windows Update installing .net 4.5; apparently RS will not run correctly and uses .net 4.0; as I recall.
    For the record, Windows Update should be disabled or set to manual on production servers. Until an update is tested for your environment, or unless it is vital to correct a current issue, you probably don't need it.

    Or in laymen's terms... if it ain't broke, don't try to fix it (or you might end up having to fix it!).

    Leave a comment:


  • cliff collins
    replied
    Watch out for Windows Update installing .net 4.5; apparently RS will not run correctly and uses .net 4.0; as I recall.

    Leave a comment:


  • Markus
    replied
    Originally posted by jraiten View Post
    Everything was fine with my Virtual Machine running Revit Server 2012. I could access the Admin Console, and Connect to RCS through Revit at a workstation. I then installed Revit Server 2013 Rebooted the Server. I can access the Server in both Revit 2012 and 2013 but I can not access the "RevitServerAdmin" or "RevitServerAdmin2013" console for either Revit Server 2012 or Revit Server 2013. I even tried uninstalling silverlight and re-installing it. no go.

    Any Ideas?
    What is the error message? I encountered the issue, that Revit Server Administrator was unavailable....

    Autodesk came back with the solution, which required:

    run the aspnet_regiis command from the .NET Framework folder.

    Go to this folder at the elevated DOS Command prompt.
    "CD C:\Windows\Microsoft.NET\Framework64\v4.0.30319" , and then run the “aspnet_regiis –I” command.

    Leave a comment:


  • bmccallum
    replied
    Also check that the RSN.ini file is correct. I have seen RSAdmin not display any projects or allow tools to work until RSN.ini is correct.

    Leave a comment:

Related Topics

Collapse

Working...
X