Announcement

Collapse
No announcement yet.

How do you do the ramp ?!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    How do you do the ramp ?!

    Hi i have ramp that leads to grage just first time face this in revit so i used ramp command in revit but it is not going right the ramp its depth to below is not enough and it seems i can not control it
    any suggestion for creating this ramp
    Thanks
    Attached Files

    #2
    Probably easiest to create a new level for your landing and set it as one of your controlling levels.
    Revit for newbies - A starting point for RFO


    chad
    BEER: Better, Efficient, Elegant, Repeatable.

    Comment


      #3
      that what i am did actually so that is why it is strange
      Attached Files

      Comment


        #4
        Remove the offsets from your Base & Top? I haven't used the ramp tool very much so I'm limited in my help.
        Revit for newbies - A starting point for RFO


        chad
        BEER: Better, Efficient, Elegant, Repeatable.

        Comment


          #5
          I've messed with them a little.
          First, at the bottom of the properties you can set a max slope. The ramp can slope less, just not more.

          So, you need to know what your rise needs to be, and your length. Figure out the slope and make sure the max slope is greater. Then, your offsets should work. HTH
          Dan

          Comment

          Related Topics

          Collapse

          Working...
          X