Announcement

Collapse
No announcement yet.

stairs rising on the other side required ??!

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    stairs rising on the other side required ??!

    Hi, i find that riser on the side is not filling althougn next rise did fill.
    why ?
    i attached one for my problem
    and one during sketch mode because solution can come from sketch mode.
    Attached Files
    Last edited by ahmed_hassan; November 16, 2011, 02:20 PM.
    Tags: None
    #2
    I've had something similar to this happen, but I can't remember how I fixed it.

    Try setting both top and bottom level as the same one, then use an offset. For instance, top would be level 1 with 0 offset. Bottom will be level 1 with - 12" offset (or whatever it is). See if that helps.
    Dan

    Comment

      #3
      It looks like you have green boundary line where riser line should be.

      Comment

        #4
        Dan the suggestion did not work for me, i set base level :1 with offset 0.3meter , base level :1 with offset 0. PijPiwo when i sketch riser line above boundaryline the programme will not let me go (overlapping or something like that cause programme complain .....).

        Comment

          #5
          Take a look at the pics.
          Attached Files

          Comment

            #6
            Thanks PijPiwo that exactly what i am looking for. it works but just want to mention that green line is the same path for railing and the path of railing can be edited too. great that i know this info also.

            Comment

              #7
              Ahh, good job PijPiwo. I didn't even notice that. :thumbsup:
              Dan

              Comment

                #8
                thanks you too Dan for trying to help me i appreciate it.

                Comment

                  #9
                  No problem. Now that I think of it, I think I started a thread here with the same issue. And that was the solution. I was doing it wrong. :laugh:
                  Dan

                  Comment

                  Previous template Next

                  Related Topics

                  Collapse

                  Monumetric Footer In-screen

                  Collapse
                  Working...
                  X
                  😀
                  🥰
                  🤢
                  😎
                  😡
                  👍
                  👎