Load Takedown results import

modjibe

New Member

Join Date: September 1, 2011

Posts: 1
#1

Load Takedown results import

September 1, 2011, 10:16 AM

Hi,

I'm using Revit 2012 and I try to use the Load Takedown extension. I have no problems to import the model and calculate. But when I import the results back into Revit, it seems to import only the internal loads in thecolumns. I guess I could have them for the walls and the foundations as well. Any idea ?

Bests,

JB
Tags: extension, import, load, results, takedown

Previous template Next

How do I import Visio .vsd format?

Somehow, I did this once before. Although the results were less than adequate, at least I could do it. Unfortunately, I did not keep notes on how I did...
- Channel: Architecture and General Revit Questions
April 24, 2012, 05:29 PM
Importing .jt files in Revit

Hi There,
Is it possible to import .jt file in Revit?

Thanks in advance
sharannya
- Channel: Architecture and General Revit Questions
January 15, 2014, 08:16 AM
Spiderinnet: Revit Parameter Organizer: Import Family Parameter into Models - Import

Import Family Parameters into Models command set has the following three sub commands: Import to Open Families Import to Project Families Import to Family...
- Channel: Blog Feeds
February 20, 2016, 09:45 PM
Spiderinnet: Revit Parameter Organizer: Import Family Parameter into Models - Import

Import Family Parameters into Models command set has the following three sub commands: Import to Open Families Import to Project Families Import to Family...
- Channel: Blog Feeds
February 20, 2016, 06:45 AM
Spiderinnet: Revit Parameter Organizer: Import Family Parameter into Models - Import

Import Family Parameters into Models command set has the following three sub commands: Import to Open Families Import to Project Families Import to Family...
- Channel: Blog Feeds
February 21, 2016, 07:15 AM

Welcome to the Revit Forum