Hi,
I'm using Revit 2012 and I try to use the Load Takedown extension. I have no problems to import the model and calculate. But when I import the results back into Revit, it seems to import only the internal loads in thecolumns. I guess I could have them for the walls and the foundations as well. Any idea ?
Bests,
JB
Announcement
Collapse
No announcement yet.
Load Takedown results import
Collapse
X
Related Topics
Collapse
-
Somehow, I did this once before. Although the results were less than adequate, at least I could do it. Unfortunately, I did not keep notes on how I did...April 24, 2012, 06:29 PM
-
Hi There,
Is it possible to import .jt file in Revit?
Thanks in advance
sharannyaJanuary 15, 2014, 09:16 AM -
Import Family Parameters into Models command set has the following three sub commands: Import to Open Families Import to Project Families Import to Family...
-
Channel: Blog Feeds
February 20, 2016, 10:45 PM -
-
Import Family Parameters into Models command set has the following three sub commands: Import to Open Families Import to Project Families Import to Family...
-
Channel: Blog Feeds
February 20, 2016, 07:45 AM -
-
Import Family Parameters into Models command set has the following three sub commands: Import to Open Families Import to Project Families Import to Family...
-
Channel: Blog Feeds
February 21, 2016, 08:15 AM -