Announcement

Collapse
No announcement yet.

view issues

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Darius
    replied
    underlay worked thankyou

    Leave a comment:


  • flayre
    replied
    Not what he meant. Check to see if you have an underlay on in the view of another level (or "worse" the same level, though in my experience that usually makes all the elbows/fittings disappear).

    Are design options being used? Is there a plan region?

    Is it *only* the one view - if you create a new view of the same level or go to a 3d view, do they grey out the fittings/air terms/duct acc.... as well?

    Leave a comment:


  • Darius
    replied
    I am the mechanical designer i cant underlay my own model

    tried adjusting between mechanical and coordination in the floor plan properties that had no effect either

    these elements are also in the same worksets as the ductwork witch shows up fine

    Leave a comment:


  • tzframpton
    replied
    Try Underlay.

    Leave a comment:


  • Darius
    started a topic view issues

    view issues

    I have an issue with a view in project

    It is a mechanical model with duct fittings, duct accessories, & air terminals show up grey

    things that i have check

    filters

    viz and graphics

    override element in view

    phasing

    not sure what else to check any ideas?
Loading...
Working...
X