Using 2017 and I have hotkeys for select link underlay and pinned elements. It doesn't save much time but if I could have one shortcut turn all of them off it could be much quicker than using a mouse. Is there anyway to do this in Revit or do I need something outside of it?
Announcement
Collapse
No announcement yet.
Hotkey for multiple simutaneous commands
Collapse
X
-
You can't do this in Revit AFAIK, only individual shortcuts for each.
I use a Gaming Mouse and a Gaming Keyboard for Revitting as you can set up custom macros. Very handy for repetitive tasks.I used to be high on life, until I realised it was cut with Morons.
Combating ignorance daily through learning.
-
A 'command line' for Revit was joked about but it really would be a great idea to save time doing you Revit thingy's more rapidly. I personally am a great keyboard fan I like so streamline routines my means of scripts. You should not be accepting to buy extra gaming hardware to combine relative simple repatative functions. These Buttons, ribbons actions suck and will never be anyway as fast as your other cad product, sorry Autodesk..
Last edited by HansLammerts; May 4, 2017, 03:22 PM.
Comment
-
Originally posted by HansLammerts View PostA 'command line' for Revit was joked about but it really would be a great idea to save time doing you Revit thingy's more rapidly. I personally am a great keyboard fan I like so streamline routines my means of scripts. You should not be accepting to buy extra gaming hardware to combine relative simple repatative functions. These Buttons, ribbons actions suck and will never be anyway as fast as your other cad product, sorry Autodesk..
https://www.revitforum.org/third-par...oly-smack.htmlThere are no stupid questions, only stupid people
Comment
-
Originally posted by HansLammerts View PostYou should not be accepting to buy extra gaming hardware to combine relative simple repatative functions.[/url]
Originally posted by HansLammerts View PostThese Buttons, ribbons actions suck and will never be anyway as fast as your other cad product, sorry Autodesk..
Instead of trolling, maybe you could add something useful to the conversation.I used to be high on life, until I realised it was cut with Morons.
Combating ignorance daily through learning.
Comment
-
If there was anything possitive to contribute I would do so, but i don't see much positive. I guess the bitCghing died after a couple of years, talking to Autodesk is talking to deaf ears. Does Dynamo offer something in this regard? Taking about it.. I have nothing seen *anything* as alternative to buying extra hardware.. Yours sincerely, revitroll.
The autohotkey seem an idea but I doubt you will be able to get 'deeper' into the ribbons commandsLast edited by HansLammerts; May 5, 2017, 08:41 AM.
Comment
-
Originally posted by HansLammerts View PostThe autohotkey seem an idea but I doubt you will be able to get 'deeper' into the ribbons commands
For Revit, WT/ZA is a good one. Set plane/pick plane is another. I have both of these set to a single key stroke. I have tilde (~) button set to act as <enter> so i can tap it with my left hand. I also have my mouse scroll wheel set to zoom in and out faster, reduces RSI. Hell, you can even create your own splash screen menus full of buttons if you want.
Don't knock it until you've tried it. Or just live in your own sea of negativity.There are no stupid questions, only stupid people
Comment
-
Originally posted by HansLammerts View PostIf there was anything possitive to contribute I would do so, but i don't see much positive.
Then again you could go join the AECOsim/ArchiCAD/Vectorworks forums to find some 'friends' who share your opinion. I'll stay here where the helpful, clever & nice people are.I used to be high on life, until I realised it was cut with Morons.
Combating ignorance daily through learning.
Comment
-
Sorry, Still have to use Revit once in a while. Think I still hang around till the time comes..
A 'cheers&joy only' forum?Last edited by HansLammerts; May 6, 2017, 01:10 PM.
Comment
-
Originally posted by HansLammerts View PostSorry, Still have to use Revit once in a while. Think I still hang around till the time comes..
A 'cheers&joy only' forum?
If your other forums know exactly how things work 100% of the time then congratulations on the back patting party. Must be nice to know everything. Oh wait, now you're redundant because everything has been coded to perfection
Finally I understand why your user image is a big red cross.There are no stupid questions, only stupid people
Comment
Related Topics
Collapse
-
hi guys & girls, is there a way to create a shortcut for 'minimize ribbon'? searching for terms like 'ribbon' and 'minimize' through the list of keyboard...April 19, 2011, 07:34 AM
-
I've been using Revit for a number of years now, I was using AutoCAD and have not been needing to use that anymore
.
When I was using it I had...April 14, 2017, 03:58 PM -
Some years ago there were posts about using shortcuts and 3rd party macro utilities with Revit but I've not seen anything for a while.
Just...-
Channel: Tutorials, Tips & Tricks
January 7, 2016, 10:39 AM -
-
So some brief searching it looks like i wasn't alone on the internet in using products by Razer for quick access to frequently used shortcuts and creating...
-
Channel: Hardware and Infrastructure
March 22, 2016, 09:44 PM -
-
Hello,
I just wanted to know if there is a way to delete reserved revit keyboard shortcut (the one that are greyed out automatically) in...January 16, 2020, 11:12 AM
Comment