Announcement

Collapse
No announcement yet.

Toposurface

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Toposurface

    Hey,

    i have splited a part of my surface deleted some points and changed some levels.... after i merged my surface
    and i have a small problem with the points...
    So the old points didnt come back so my topography is not like the original one.

    Is there any way to copy paste points from an older save project of mine and paste it in the modified topograpfy?


    Thanks

    #2
    Hello there! I have another issue.
    Im using Revit 2014.
    I have the same problem as the fellow mentioned in 2007(!). We are working on a huge project (30 buildings, in a large plot of land). We have designed the buildings and, as ex links they come to the huge revit project that has the whole plot of land, where we are designing the roads etc.
    I have two fases (existing -demolished by new- and the new one).
    I have the toposurface in existing fase, and a graded toposurface in the new fase.
    Im setting my pads, on the new fase.
    Some pads show cut and fill volumes properly in schedules , some show 0 !!!
    What is going on? What more should i check?
    I have already made 300 pads, and im not done!
    Any ideas? as far as im searching through forums, i find things i have already checked.
    Thanks,
    C.

    Comment

    Related Topics

    Collapse

    Working...
    X