Announcement

Collapse
No announcement yet.

How to move Zero point of base project

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
    #1

    How to move Zero point of base project

    hello,
    I am French user of REVIT Architecture and seeking how to move the zero point of the project to a level NGF provided by a surveyor.
    Thank you for your help

    I use the Google translator, so be forgiving
    Il vaut mieux un qui sait plutôt que dix qui cherchent

    I'm Just simple Architect en France !
    Tags: None
    #2
    Answer provided in French section, feel free to add here your comments Revit gurus. :thumbsup:
    Julien
    "Au royaume des aveugles, les borgnes sont mal vus!"
    P. DAC
    Follow me on Twitter @Jbenoit44 - Blog: http://aecuandme.wordpress.com/

    Comment

      #3
      That's great REVIT Forum here ! :thumbsup:
      Il vaut mieux un qui sait plutôt que dix qui cherchent

      I'm Just simple Architect en France !

      Comment

        #4
        Originally posted by jbenoit44 View Post
        Answer provided in French section, feel free to add here your comments Revit gurus. :thumbsup:
        can those of us whom are non French speaking see the answer to the OP here?
        I'm retired, if you don't like it, go around!

        Comment

          #5
          Originally posted by Dave Jones View Post
          can those of us whom are non French speaking see the answer to the OP here?
          sure, will translate when solved.
          Julien
          "Au royaume des aveugles, les borgnes sont mal vus!"
          P. DAC
          Follow me on Twitter @Jbenoit44 - Blog: http://aecuandme.wordpress.com/

          Comment

            #6
            Originally posted by jbenoit44 View Post
            sure, will translate when solved.
            thank you!
            I'm retired, if you don't like it, go around!

            Comment

              #7
              So, finally a brief translation of what I discuss with pcamliti:
              the story was about project elevation along the Z axis. pcamliti wanted to move the project to the correct position to match the site survey. I first thought he wanted to specify a share level to the 0 level. in fact, he would have replace the project along Z axis.
              his choice was to set the site survey to the 0 level instead of moving the project.

              extra informations about this are welcome, even if it was already discussed somewhere.
              Julien
              "Au royaume des aveugles, les borgnes sont mal vus!"
              P. DAC
              Follow me on Twitter @Jbenoit44 - Blog: http://aecuandme.wordpress.com/

              Comment

                #8
                Originally posted by jbenoit44 View Post
                So, finally a brief translation of what I discuss with pcamliti:
                the story was about project elevation along the Z axis. pcamliti wanted to move the project to the correct position to match the site survey. I first thought he wanted to specify a share level to the 0 level. in fact, he would have replace the project along Z axis.
                his choice was to set the site survey to the 0 level instead of moving the project.

                extra informations about this are welcome, even if it was already discussed somewhere.
                so he set the topo to the project level rather than changing the project level to match the topo elevation? Is it difficult to move a project in the Z direction after it is started? My projects are normally level 1 at 0'-0" but the project that I'm currently working on is level 1 at +388'-0". Before I started I changed the level(s) to that elevation and so far haven't had any problems but then again I did it before any work was done.
                I'm retired, if you don't like it, go around!

                Comment

                  #9
                  Originally posted by Dave Jones View Post
                  so he set the topo to the project level rather than changing the project level to match the topo elevation? Is it difficult to move a project in the Z direction after it is started? My projects are normally level 1 at 0'-0" but the project that I'm currently working on is level 1 at +388'-0". Before I started I changed the level(s) to that elevation and so far haven't had any problems but then again I did it before any work was done.
                  My decision in first was modeling the topo in level furnished by the "géomètre" and after i took it to move at same level project. Is not the best choice but it was easily realisation for me.
                  Il vaut mieux un qui sait plutôt que dix qui cherchent

                  I'm Just simple Architect en France !

                  Comment

                    #10
                    For changing the elevation (or the coordinates) just move the survey point.
                    Just don't forget to unlock its relashion with the project base point.
                    There is no need to move levels up and down.
                    Gonçalo Feio
                    "Ignorance, ignorance, sheer ignorance - you know there's no confidence to equal it. It's only when you know something about a profession, I think, that you're timid and careful." George Orson Welles

                    Comment

                    Previous 1 2 template Next

                    Related Topics

                    Collapse
                    Working...
                    X