Announcement

Collapse
No announcement yet.

Slanted columnn issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • jh75
    replied
    Thanks mate,

    For some reason it didn’t cross my mind using Ref lines - it solved the issue with having a slanted column.
    When changing the Base Cut (or Top Cut) from Horiz to any other option the columns go funny again – but I can live that.

    Thanks again for looking at this,

    Jh

    Leave a comment:


  • alexo4141
    replied
    Originally posted by jh75 View Post
    The column is made up out of 3 different sweeps.
    What I did is to replace your main sweep by one that follows Reference lines instead of snapping to intersection of reference planes. Just tested it with a end point driven slanted column and it seems to work fine.

    I'll let you go through the whole testing process.

    HTH
    Attached Files

    Leave a comment:


  • jh75
    started a topic Slanted columnn issue

    Slanted columnn issue

    Hi,

    I have create the attached column. It works ok when vertical but when I changed it to slanted it goes all funny – see attached image. The column is made up out of 3 different sweeps

    Any suggestion on what might be wrong would be much appreciated.

    Thanks,
    jh
    Attached Files

Related Topics

Collapse

Working...
X