Announcement

Collapse
No announcement yet.

Hide Webmember in Truss

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
    Ning Zhou
    Senior Member

  • Ning Zhou
    replied
    good solution, turn off web subcat in struc framing cat won't affect existing same struc framing as web! confused a bit at 1st as it's not under struc trusses cat, seems struc framing included pretty much everything under its subcats i.e. web, chord, girder, purlin, etc

    Leave a comment:

  • Joe_Charpentier
    Member

  • Joe_Charpentier
    replied
    Hi-

    You can turn of the visibility of truss webs in a particular view using visibility/graphics.

    Go to visibility/Graphics for the view, expand the "Structural Framing" category, and look for the Web" subcategory. If you uncheck the subcategory, the Truss webs will not appear in your view.

    Does this accomplish what you need it do, or is there some other nuance of your question I'm not understanding?

    Joe

    Capture.PNG
    Joe_Charpentier
    Member
    Last edited by Joe_Charpentier; March 12, 2018, 03:02 PM.

    Leave a comment:

  • Ning Zhou
    Senior Member

  • Ning Zhou
    replied
    i don't see that the web line can be set to a sub-category (of trusses), i mean in truss family or in project, probably i missed something here?
    the web line visibility in truss family won't affect visibility of web element so using "empty" web element is a little bit easy than hunting those out to hide

    Leave a comment:

  • snowyweston
    Moderator

  • snowyweston
    replied
    The web line or the web element?
    Former: The web line can be set to a sub-category (of trusses)
    Latter: the web elements become structural framing elements in-themselves, so you need to be hunting those out to hide.

    /caveat : it has been a very very long time since I messed around with trusses.

    Leave a comment:

  • Ning Zhou
    Senior Member

  • Ning Zhou
    replied
    right, creating visible parameters in truss won't populate to related webs/chords, looks like a bug to me or at least should be on wish-list FACTORY!
    workaround is to create "empty" framing (perhaps w/ only single line) and apply to webs in truss type properties, any better solution?

    Leave a comment:


  • JWR
    started a topic Hide Webmember in Truss

    Hide Webmember in Truss

    Is it possible to hide a web form a Truss I used visible parameter looks like does not work. :banghead:
    I think trusses are very special and different that other families I work a lot with structural framing almost everything is then possible. Is there a solution.
    What I try to make is a truss with option on and off.

Related Topics

Collapse

Working...
X