Donate Now Goal amount for this year: 2500 USD, Received: 1627 USD (65%)

Results 1 to 8 of 8
Like Tree7Likes
  • 1 Post By amoursol
  • 1 Post By Dave Jones
  • 1 Post By Dave Jones
  • 2 Post By elton williams
  • 2 Post By DaveP

Thread: Dynamo 1.3 and Revit 2015?

  1. #1
    Moderator
    "I am NOT a Revit tutor!"
    Dave Jones's Avatar
    Join Date
    December 7, 2010
    Location
    San Luis Obispo, California USA
    Posts
    4,491
    Current Local Time
    10:37 AM

    Dynamo 1.3 and Revit 2015?

    I've been learning basic Dynamo in R2015 and yesterday I installed Dynamo 1.3 and 1.2.1 is now gone from R2015. No more Dynamo. I read the Readme first and there was no mention of no longer supporting Dynamo in R2015. What's up with that? I can reinstall 1.2.1 for R2015 only I guess.

  2. #2
    Senior Member amoursol's Avatar
    Join Date
    November 21, 2012
    Location
    London, United Kingdom
    Posts
    612
    Current Local Time
    06:37 PM
    That's correct. There is no more support for Revit 2015 from Dynamo 1.3+. The release cycle and support cycle parallel Revit's.

    I also ran into the same issue but now just don't use Revit 2015
    truevis likes this.

  3. #3
    Moderator
    "I am NOT a Revit tutor!"
    Dave Jones's Avatar
    Join Date
    December 7, 2010
    Location
    San Luis Obispo, California USA
    Posts
    4,491
    Current Local Time
    10:37 AM
    Quote Originally Posted by amoursol View Post
    That's correct. There is no more support for Revit 2015 from Dynamo 1.3+. The release cycle and support cycle parallel Revit's.

    I also ran into the same issue but now just don't use Revit 2015
    unfortunately I'm at the mercy of the Architect's Revit version on the projects that I work on and have 3 large projects being done in R2015. So, I have discovered also that 1.3 and 1.2 will not install side by side even if 1.2 is installed for R2015 only. The Dynamo 1.3 Core files overwrite the 1.2 files. So, I have uninstalled 1.3 and gone back to 1.2 for awhile

    more info here if anyone is interested
    amoursol likes this.

  4. #4
    Senior Member amoursol's Avatar
    Join Date
    November 21, 2012
    Location
    London, United Kingdom
    Posts
    612
    Current Local Time
    06:37 PM
    Not the end of the world, but a mild frustration I agree. Hopefully the projects are finalised swiftly!

  5. #5
    Moderator
    "I am NOT a Revit tutor!"
    Dave Jones's Avatar
    Join Date
    December 7, 2010
    Location
    San Luis Obispo, California USA
    Posts
    4,491
    Current Local Time
    10:37 AM
    Quote Originally Posted by amoursol View Post
    Not the end of the world, but a mild frustration I agree. Hopefully the projects are finalised swiftly!
    one could hope but one of the projects is a fourth office building of six to be built and the Architect is stuck on R2015. He told me that they are afraid to upgrade LOL! Thanks for the help!
    amoursol likes this.

  6. #6
    Forum Addict elton williams's Avatar
    Join Date
    December 7, 2010
    Location
    Gold Coast
    Posts
    2,621
    Current Local Time
    03:37 AM
    Quote Originally Posted by Dave Jones View Post
    one could hope but one of the projects is a fourth office building of six to be built and the Architect is stuck on R2015. He told me that they are afraid to upgrade LOL! Thanks for the help!
    Same issue in our office, architects afraid to upgrade from 2015. It was suggested that consultants may not have 2017. Yeah, well what about that consultant who sent you a 2017 file and now you can't open it? Lol.
    Dave Jones and amoursol like this.

  7. #7
    Moderator
    "I am NOT a Revit tutor!"
    Dave Jones's Avatar
    Join Date
    December 7, 2010
    Location
    San Luis Obispo, California USA
    Posts
    4,491
    Current Local Time
    10:37 AM
    and as an additional note related to this issue, R2018 installation installs Dynamo 1.2.2 (which is rather strange since 1.3 is out??) and 1.2.2 will not run in R2015 either. So, I have uninstalled 1.2.2 and reinstalled 1.2.1 again

  8. #8
    Moderator DaveP's Avatar
    Join Date
    January 10, 2011
    Location
    St Paul, MN
    Posts
    2,984
    Current Local Time
    12:37 PM
    Jon (Sixty Second Revit) made a post about versions a few weeks ago
    Highest #DynamoBIM Version for #Revit Versions
    It hasn't been updated for 2018 or 1.3, but let's give him a break. 2108 just came out today!
    amoursol and johnp like this.

Similar Threads

  1. Replies: 0
    Last Post: December 9th, 2015, 10:30 AM
  2. Problems with Revit 2015 model loaded into Revit LT (2015 & 2016)
    By Glen1980 in forum Architecture and General Revit Questions
    Replies: 2
    Last Post: April 20th, 2015, 02:20 PM
  3. Replies: 0
    Last Post: January 18th, 2015, 09:45 PM
  4. Replies: 0
    Last Post: March 25th, 2014, 01:45 AM
  5. Replies: 0
    Last Post: August 26th, 2013, 07:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •